Pages

Wednesday, August 3, 2011

1W FM Booster based 2N4427


electronic http://www.blogger.com/img/blank.gifhttp://www.blogger.com/img/blank.gifcircuit diagram


This is the circuit diagram of linear FM Booster / RF amplifier based 2N4427 Philips transistor. The RF Amplifier is for boosting small fm transmitters and bugs. It use two Philips 2N4427 and its power is about 1Watt. At the output you can drive any linear with BGY133 or BLY87 and so on. Its power supply has to give 500mA current at 12 Volts. More voltage can boost the distance but the transistors will be burned much earlier than usual.! In any case do not exceed the 15Volts. The Amp offers 15 dB in the area of 80Mhz to 110 Mhz. L4, L5, and L6 are 5mm diameter air coils, 8 turns, with wire 1mm wire diameter. This is an easy project, but will give you great results.

1 comment:

  1. There is application Digeus I recommend to use this software when system hangs, doesn't boot up, freezes or chashes. I also recommend Windows Tune Up Suite form Windsty. It fixes most of windows problems.

    ReplyDelete